Product Description
Item Description:
1.Flexspline is a hollow flanging standard cylinder framework.
2.There is a large-diameter hollow shaft gap in the center of the cam of the wave generator. The interior design of the reducer has a assistance bearing.
3.It has a completely sealed framework and is effortless to put in. It is extremely suitable for the situations exactly where the wire wants to be threaded from the centre of the reducer.
Advantages:
The initial:High precision,higher torque
The second:committed technological personnel can be on-the-go to supply style solutions
The 3rd:Manufacturing facility direct revenue fantastic workmanship tough good quality assurance
The fourth:Item high quality issues have a a single-calendar year guarantee time, can be returned for replacement or mend
Organization profile:
Â
HangZhou CZPT Technological innovation Co., Ltd. established in 2014, is dedicated to the R & D plant of high-precision transmission parts. At present, the once-a-year manufacturing capability can achieve 45000 sets of harmonic reducers. We firmly think in high quality 1st. All hyperlinks from raw supplies to finished goods are strictly supervised and managed, which supplies a sound foundation for item good quality. Our items are sold all in excess of the place and overseas.
The harmonic reducer and other substantial-precision transmission elements were independently produced by the firm. Our firm spends 20% of its product sales every single year on the research and development of new systems in the sector. There are 5 people in R & D.
Our edge is as below:
1.7 a long time of marketing expertise
two. 5-particular person R & D group to provide you with specialized assistance
3. It is bought at home and abroad and exported to Turkey and Eire
4. The product quality is assured with a 1-yr guarantee
5. Goods can be tailored
Strength manufacturing facility:
Our plant has an complete campus The variety of workshops is all around three hundred No matter whether it’s from the manufacturing of uncooked components and the procurement of raw resources to the inspection of completed items, we are doing it ourselves. There is a full production program
HST-III Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at start stop | The allowable highest of the typical load torque | Maximum torque is authorized in an immediate | Permit the greatest speed to be entered | Regular enter speed is authorized | Back gap | design and style life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | fifty | 6.2 | .six | 20.seven | two.one | seven.nine | .seven | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
eighty | 9 | .9 | 27 | two.seven | twelve.7 | one.3 | fifty four.1 | five.5 | |||||
a hundred | 9 | .9 | 32 | 3.three | 12.7 | 1.three | sixty two.one | 6.3 | |||||
17 | fifty | 18.four | one.nine | 39 | 4 | 29.9 | 3 | eighty.five | eight.two | 6500 | 3000 | ≤30 | 15000 |
80 | twenty five.three | two.6 | forty nine.5 | five | 31 | 3.two | 100.1 | 10.2 | |||||
100 | 27.six | two.eight | 62 | 6.3 | 45 | 4.six | 124.2 | 12.7 | |||||
20 | fifty | 28.8 | two.nine | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.one | 4 | 85 | 8.eight | 54 | 5.5 | 146.1 | 14.nine | |||||
a hundred | forty six | four.7 | ninety four.3 | nine.6 | 56 | 5.eight | 169.one | seventeen.two | |||||
a hundred and twenty | 46 | four.seven | 100 | ten.2 | fifty six | five.eight | 169.one | seventeen.two | |||||
one hundred sixty | forty six | 4.7 | a hundred | ten.2 | 56 | 5.eight | 169.1 | 17.2 | |||||
25 | fifty | 44.nine | four.6 | 113 | eleven.five | sixty three | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
eighty | seventy two.five | seven.four | 158 | sixteen.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
one hundred | seventy seven.one | 7.9 | 181 | eighteen.4 | 124 | twelve.7 | 326.six | 33.three | |||||
one hundred twenty | seventy seven.1 | seven.nine | 192 | 19.six | 124 | twelve.seven | 349.6 | 35.six | |||||
32 | fifty | 87.4 | eight.nine | 248 | twenty five.3 | 124 | 12.seven | 439 | forty four.8 | 4000 | 3000 | ≤30 | 15000 |
80 | a hundred thirty five.7 | thirteen.8 | 350 | 35.six | 192 | 19.six | 653 | 66.six | |||||
100 | 157.six | 16.1 | 383 | 39.one | 248 | 25.three | 744 | seventy five.nine | |||||
40 | one hundred | 308 | 37.two | 660 | sixty seven | 432 | forty four | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at commence end | The allowable optimum of the regular load torque | Maximum torque is allowed in an instant | Let the maximum speed to be entered | Common input pace is allowed | Again hole | design and style life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | .7 | 23 | two.3 | 9 | .nine | 46 | four.7 | 14000 | 8500 | ≤20 | 15000 |
eighty | 10 | one | thirty | three.1 | 14 | 1.4 | 61 | 6.2 | |||||
one hundred | 10 | one | 36 | 3.seven | 14 | 1.four | 70 | 7.two | |||||
17 | 50 | 21 | two.one | forty four | four.five | 34 | 3.4 | ninety one | 9 | 10000 | 7300 | ≤20 | 20000 |
eighty | 29 | two.9 | fifty six | five.7 | 35 | 3.6 | 113 | 12 | |||||
a hundred | 31 | three.2 | 70 | 7.2 | 51 | 5.two | 143 | fifteen | |||||
20 | 50 | 33 | three.three | seventy three | 7.four | 44 | four.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
eighty | 44 | 4.5 | 96 | 9.eight | 61 | six.two | 165 | 17 | |||||
100 | 52 | 5.three | 107 | 10.9 | 64 | six.5 | 191 | 20 | |||||
120 | 52 | 5.three | 113 | eleven.5 | sixty four | six.five | 191 | 20 | |||||
a hundred and sixty | fifty two | five.three | 120 | twelve.2 | sixty four | six.five | 191 | 20 | |||||
25 | 50 | fifty one | 5.two | 127 | thirteen | seventy two | seven.three | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
eighty | eighty two | 8.four | 178 | 18 | 113 | 12 | 332 | 34 | |||||
100 | 87 | 8.nine | 204 | 21 | 140 | 14 | 369 | 38 | |||||
120 | 87 | 8.nine | 217 | 22 | a hundred and forty | fourteen | 395 | 40 | |||||
32 | 50 | ninety nine | 10 | 281 | 29 | one hundred forty | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
eighty | 153 | sixteen | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
forty | 100 | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibition:
Application scenario:
FQA:
Q: What ought to I supply when I decide on gearbox/pace reducer?
A: The ideal way is to offer the motor drawing with parameter. Our engineer will examine and advise the most suited gearbox design for your refer.
Or you can also offer under specification as well:
1) Kind, design and torque.
two) Ratio or output pace
3) Working issue and connection approach
4) Quality and put in machine title
five) Input method and input velocity
6) Motor brand name product or flange and motor shaft dimensions
US $349.2 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | 0.7 | 23 | 2.3 | 9 | 0.9 | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
80 | 10 | 1 | 30 | 3.1 | 14 | 1.4 | 61 | 6.2 | |||||
100 | 10 | 1 | 36 | 3.7 | 14 | 1.4 | 70 | 7.2 | |||||
17 | 50 | 21 | 2.1 | 44 | 4.5 | 34 | 3.4 | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | 2.9 | 56 | 5.7 | 35 | 3.6 | 113 | 12 | |||||
100 | 31 | 3.2 | 70 | 7.2 | 51 | 5.2 | 143 | 15 | |||||
20 | 50 | 33 | 3.3 | 73 | 7.4 | 44 | 4.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
80 | 44 | 4.5 | 96 | 9.8 | 61 | 6.2 | 165 | 17 | |||||
100 | 52 | 5.3 | 107 | 10.9 | 64 | 6.5 | 191 | 20 | |||||
120 | 52 | 5.3 | 113 | 11.5 | 64 | 6.5 | 191 | 20 | |||||
160 | 52 | 5.3 | 120 | 12.2 | 64 | 6.5 | 191 | 20 | |||||
25 | 50 | 51 | 5.2 | 127 | 13 | 72 | 7.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
80 | 82 | 8.4 | 178 | 18 | 113 | 12 | 332 | 34 | |||||
100 | 87 | 8.9 | 204 | 21 | 140 | 14 | 369 | 38 | |||||
120 | 87 | 8.9 | 217 | 22 | 140 | 14 | 395 | 40 | |||||
32 | 50 | 99 | 10 | 281 | 29 | 140 | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
80 | 153 | 16 | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
40 | 100 | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
US $349.2 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | 0.7 | 23 | 2.3 | 9 | 0.9 | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
80 | 10 | 1 | 30 | 3.1 | 14 | 1.4 | 61 | 6.2 | |||||
100 | 10 | 1 | 36 | 3.7 | 14 | 1.4 | 70 | 7.2 | |||||
17 | 50 | 21 | 2.1 | 44 | 4.5 | 34 | 3.4 | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | 2.9 | 56 | 5.7 | 35 | 3.6 | 113 | 12 | |||||
100 | 31 | 3.2 | 70 | 7.2 | 51 | 5.2 | 143 | 15 | |||||
20 | 50 | 33 | 3.3 | 73 | 7.4 | 44 | 4.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
80 | 44 | 4.5 | 96 | 9.8 | 61 | 6.2 | 165 | 17 | |||||
100 | 52 | 5.3 | 107 | 10.9 | 64 | 6.5 | 191 | 20 | |||||
120 | 52 | 5.3 | 113 | 11.5 | 64 | 6.5 | 191 | 20 | |||||
160 | 52 | 5.3 | 120 | 12.2 | 64 | 6.5 | 191 | 20 | |||||
25 | 50 | 51 | 5.2 | 127 | 13 | 72 | 7.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
80 | 82 | 8.4 | 178 | 18 | 113 | 12 | 332 | 34 | |||||
100 | 87 | 8.9 | 204 | 21 | 140 | 14 | 369 | 38 | |||||
120 | 87 | 8.9 | 217 | 22 | 140 | 14 | 395 | 40 | |||||
32 | 50 | 99 | 10 | 281 | 29 | 140 | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
80 | 153 | 16 | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
40 | 100 | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Agricultural Gearboxes
There are several types of agricultural gearboxes, and they are used in various applications. Among them are Bevel gearboxes, CZPT speed gearboxes, and Worm gear speed reducers. If you’re looking for a reliable, high-performing agricultural gearbox, you’ve come to the right place. Read on to learn more about these gearboxes. Also, check out our guide to bevel gearboxes.
Bevel gearboxes
The fatigue life of bevel gearboxes in agricultural equipment is determined by the cumulative damage sums for different operations. A simulation model was used to assess the fatigue life of a spiral bevel gear. The accumulated damage sums for each operation were shown in figure 9a. The subsoiler tillage operation exceeded the damage sum of one. This criterion indicates that the fatigue life of a gearbox is shorter than its service life.
In bevel gearboxes, the second shaft has two shafts that are connected to each other. One shaft is mounted to the outer surface of the housing 3 through bearings, while the other shaft has a flange that protrudes into the gear housing. The second shaft is attached via bearings on the gear housing and flange. It is mounted in this way to allow the bevel gear to rotate smoothly.
CZPT speed gearboxes
If you are an agricultural machine owner, you know that the right speed agricultural gearboxes can make the difference between a profitable crop harvest or a disaster. Today’s agricultural machinery can be found in a variety of applications, including for crop and animal production. Many of these applications require heavy-duty gearboxes with large capacity. The quality of these agricultural gearboxes depends on the quality of their bearings, which are important to the longevity of your equipment.
Industrial CZPT gearboxes can be repaired and overhauled by qualified and experienced technicians at CZPT Products. CZPT gearboxes can be repaired or rebuilt at significant savings. For industrial uses, the RAR model is perfect for applications where space is a consideration. Industrial CZPT gearboxes are available in multiple sizes and types, and they can be customized to meet your unique needs. For the best price and service, contact CZPT Products today!
CZPT speed bevel gearboxes
The demand for food has skyrocketed since the 2010 global financial crisis, and while the world’s population is still rising, at a slower rate, land is not. This is forcing agricultural machinery manufacturers to come up with innovative solutions to maximize the use of available land. The need for agricultural machinery is also growing due to shorter cropping cycles and wear and tear on equipment. CZPT gearbox manufacturers are meeting this demand with high-quality products.
A number of benefits make CZPT speed bevel gearboxes the preferred choice for agricultural applications. In addition to its renowned performance, the product’s design has been adapted for use in agricultural and glass machinery. The result is a unit with low backlash and high transmission. Moreover, the CZPT model is the best all-rounder among servo right-angle gearboxes.
editor by czh 2023-01-24