China Hot selling China Factory Directly Supply Four Wheel Agricultural Machinery Farm Tractors cvt gearbox

Product Description

Basic Info. 

Model   1004 Wheel Tractor
 Drive Type   4WD/2WD
Overall MachineDimensions(length*width*height and location) mm 3700*1500*2450
Wheelbase mm 2000
commonly used wheel tracks mm 1200
wheel distance(front wheel/rear wheel) mm 1100-1300(adjustable)
Minimum ground clearance and location mm 380(bottom of front axle)
rear axle /  TE aggravation large bridge
standard weight(front/rear) kg 50/60
number of gears(forward/reverse) / 8+8 shuttle side gear
Maximum design theoretical speed km/h 42
Engine and main clutch connection method / direct
type of rollover protection device(cab or safety frame) / security framework
Engine structure type / In-line,direct injection,water-cooled,four-stroke
engine manufacturer / HangZhou 100 Hp
engine air intake method / turbocharging
number of engine cylinders / 4
engine standard power kw 76.3
engine standard speed r/min 2400
engine cooling method / water cooling
steering system type / fully hydraulic
steering system steering control mechanism / steering wheel
steering system steering mechanism type / front wheel steering
tyre model   front wheel:8.3-20 rear wheel:12.4-28
Suspension device type / Rear three-point suspension
number of hydraulic output groups / three
working device safety valve full opening pressure MPa 17.5-18.0
number of splinesof PTO shaft / 6
PTO shaft standard speed R/min 540/720

Product Parameters

 

1004 TRACTOR
 
Tractor A self-propelled engine used to pull and drive work machinery to complete various mobile operations. Can also do fixed work power. It is composed of engine, transmission, walking, steering, hydraulic suspension, power output, electrical instruments, driving control and traction systems or devices.
  The engine power is transmitted from the transmission system to the driving wheel to make the tractor run. In real life, it is common to use the rubber belt as the medium of power transmission. Agricultural, industrial and special purpose tractors according to function and use; According to the structure type of wheel, crawler, boat tractor and self-propelled chassis.

Features
1.It is equipped with famous and excellent engines, with large torque reserve, strong power and low fuel consumption.
2.Full hydraulic steering system, flexible and light to operate.
3.Middle shift gear, easy to operate.
4.8+2 gear shift, reasonable speed matching, high working efficiency and strong adaptability.
5.The new miniature LCD instrument is developed according to the harsh working conditions of construction machinery and has high reliability.

REAL SCENE SHOOTING

  

Although the tractor is a more complex machine, its type and size are different, but they are composed of 3 parts of the engine, chassis and electrical equipment, each of which is indispensable.

Tractor engine

It is the device that generates the power of the tractor, and its role is to convert the heat energy of the fuel into mechanical energy to output power. Most of the farm tractors produced use diesel engines.

Tractor chassis

It is the device that transmits power to the tractor. Its role is to transfer the power of the engine to the driving wheel and the working device to make the tractor travel, and to complete the mobile operation or fixed role. This function is achieved through the mutual cooperation and coordination of the transmission system, walking system, steering system, braking system and working device, and at the same time, they constitute the skeleton and body of the tractor. Therefore, we refer to the above 4 systems and 1 device as chassis. That is to say, in the whole of the tractor, all other systems and devices other than the engine and electrical equipment are collectively referred to as the tractor chassis.

Tractor electrical equipment

It is a device to ensure that the tractor uses electricity. Its role is to solve lighting, safety signals and engine starting.

  

 


 

Company Profile

 

HangZhou Qingcha Machinery Manufacturing Co., Ltd. is located in the ash high-tech park of Xihu (West Lake) Dis. Town, HangZhou City,HangZhou. It has been committed to the research and development and production of internal combustion counterbalanced forklifts, battery counterbalanced forklifts, OMV intelligent omnidirectional forklifts,wheel loader,mini dumper,mixer,backhoe loader,excavator ,tractor and mini digger.
 

 

 

Since its inception, the company has always been to build China’s most cost-effective high-quality construction machinery for the purpose of continuous research and development and innovation, the company has large CNC cutting machine, vertical machining center, horizontal gantry milling machine and other equipment more than 40 sets, to achieve all the key components Self-made, providing a strong guarantee for the quality of the product.
 

For the long-term development of the company, the company regards the quality as the life of the company, establishes a perfect quality assurance system, and has passed the IS09001 international quality system certification.
 

In the near future, HangZhou Forklift will become 1 of the CHINAMFG R&D, production and export construction machinery bases in the industry, contributing to the prosperity of the domestic and international logistics market and the promotion of innovation and development in the construction machinery industry.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Wheel Tractor
Usage: Farm Tractor, Garden Tractor, Lawn Tractor
Certification: ISO, CE

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pto gearbox

Proper Installation and Alignment of Miter Gearboxes

Installing and aligning a miter gearbox correctly is essential to ensure its optimal performance and longevity. Follow these steps to achieve proper installation and alignment:

  1. Preparation: Gather all necessary tools and equipment for the installation, including mounting hardware, shims, and alignment tools.
  2. Mounting Surface: Ensure that the mounting surface is clean, flat, and free from any debris or contaminants that could affect the gearbox’s alignment and operation.
  3. Alignment Tools: Use precision alignment tools, such as dial indicators or laser alignment systems, to accurately measure and adjust the alignment of the gearbox and its input and output shafts.
  4. Check for Parallelism: Align the input and output shafts of the gearbox to be parallel to each other and perpendicular to the mounting surface. This step is crucial to prevent misalignment-induced wear and reduce backlash.
  5. Adjustment: Use shims or other adjustable components to fine-tune the alignment. Make incremental adjustments while continuously checking the alignment with the chosen alignment tools.
  6. Bearing Loads: Ensure that the bearings supporting the gearbox shafts are properly lubricated and preloaded according to the manufacturer’s recommendations. Proper bearing preload helps maintain alignment and reduces wear.
  7. Tightening Bolts: Tighten the mounting bolts gradually and evenly to avoid introducing additional misalignment during the installation process.
  8. Runout and Clearance: Check for any runout or clearance issues during rotation by turning the input shaft. If there is any binding, interference, or abnormal noise, investigate and address the cause before finalizing the installation.
  9. Final Checks: Double-check the alignment using the alignment tools and ensure that the gearbox operates smoothly without any unusual vibrations, noises, or resistance.
  10. Documentation: Keep a record of the alignment measurements and adjustments made during the installation process. This documentation can be valuable for future reference and maintenance.

Proper installation and alignment of miter gearboxes help optimize their performance, minimize wear and tear, and contribute to the overall efficiency and reliability of the mechanical system in which they are used.

pto gearbox

Advantages of Miter Gearboxes Over Other Gear Systems

Miter gearboxes offer distinct advantages in certain scenarios that make them preferred over other types of gear systems:

90-Degree Motion Change: Miter gearboxes excel at changing the direction of motion by 90 degrees. This makes them ideal for applications where a right-angle change in motion is required.

Compact Design: Miter gearboxes have a compact and space-saving design, making them suitable for applications with limited space constraints.

Precision Steering: In automotive steering systems, miter gearboxes provide precise and accurate control over the direction of vehicles, contributing to safe and responsive steering.

Reduced Backlash: Miter gearboxes are designed to minimize backlash, ensuring accurate and smooth motion transfer. This makes them suitable for applications where precision and responsiveness are critical.

Customization: Miter gearboxes can be customized to suit specific torque, speed, and design requirements, making them adaptable to various applications.

Reliable Motion Transmission: Miter gearboxes provide reliable motion transmission and are often chosen for applications where consistent and accurate motion control is essential.

Low Noise and Vibration: The design of miter gearboxes can help reduce noise and vibration, making them suitable for applications where quiet operation is necessary.

Miter gearboxes are preferred in scenarios where their unique design and capabilities align with specific motion control and direction change requirements, offering efficiency, precision, and reliability.

pto gearbox

Significance of the Angle Between Bevel Gears in a Miter Gearbox

The angle between bevel gears in a miter gearbox is of critical significance as it determines the direction of motion transmission and the type of mechanical arrangement that can be achieved.

In a miter gearbox, the angle between the bevel gears is typically set at 90 degrees. This means that the two intersecting shafts will rotate perpendicular to each other, allowing the transmission of motion from one shaft to another at a right angle.

The 90-degree angle between bevel gears is a fundamental feature that enables various applications where changes in motion direction are required within a compact space. This configuration allows for the redirection of rotational energy and torque, making it useful in applications such as changing the orientation of power flow, redirecting motion, and transmitting power around obstacles or corners.

It’s important to note that the angle between bevel gears can be customized to different values, but 90 degrees is the most common configuration in miter gearboxes due to its versatile and practical nature. The precise angle and arrangement of the bevel gears ensure efficient motion transmission while accommodating the specific requirements of the mechanical system in which the miter gearbox is used.

China Hot selling China Factory Directly Supply Four Wheel Agricultural Machinery Farm Tractors   cvt gearbox	China Hot selling China Factory Directly Supply Four Wheel Agricultural Machinery Farm Tractors   cvt gearbox
editor by CX 2024-01-02

pto gearboxes

As one of leading pto gearboxes manufacturers, suppliers and exporters of products, We offer pto gearboxes and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto gearboxes

Recent Posts